Steampunk inspiration and resources

Posts tagged “makers

Tips for Makers: You Can Fake it When you Make it Part 3, “Plastic is Your Pal”

Plastic is an incredibly versatile material and it is everywhere. With a little ingenuity and elbow grease you can make it into just about anything.

By HeroscapersFirst off, there are toys. At any Steampunk cosplay event you can be sure you will see souped up Nerf guns and squirt guns that look like they walked right out of an H. G. Wells story. But keep in mind that if you want to paint a plastic gun that spray paint will chip over time. If you scour your plastic surface ahead of time with steel wool, sand paper or even a kitchen scouring pad you will create pores for the paint to adhere to and it will last much longer. Kinex is a line of plastic engineering toys so it is a great way to get lightweight and cheap plastic gears that you can paint to look like metal.

At the Form and Function session at The Asylum one of my favorite items was a remote-control Dalek toy that a maker Steampunked by adding metallic paint and little makeshift boiler on the back.

Doctor Quicksilver Power Glove

Major Quicksilver Power Glove

Plastic pipes like the ones you can find at the hardware store are also really useful. Just like plastic guns, they need to be roughed up before you paint them, but they are relatively easy to drill into with a small electric drill so they are easy to embellish. Major Quicksilver had an amazing “power glove” that he built by attaching a leather work glove to the interior so the fingers were flexible even though the gauntlet was rigid. It was enhanced by flexible plastic tubing and a leather strap that attaches to the upper arm.

You can also get the look of rivets without having to use real metal. If you search for “half pearls” on eBay you can find these great little half-spheres that look just like metal rivets, sometimes without having to paint them. The Major warns that you can find one with adhesive on the backs, but they are much more expensive than getting the kind you glue on yourself. And if you are attaching them to EVA foam hot glue will hold them on really well. An audience member also mentioned that dried peas or lentils can also do for rivets in a pinch, as long as you don’t mind a little irregularity in the shape.

Quicksilver flexible hand

Quicksilver flexible hand

Another great use for plastic is if you have to make something hinged. Sure, you can use real metal hinges that require screws but if you want a quick and easy hinge you can just cut plastic packaging like the top from a butter tub or the like into strips. Attach one end of each strip to the pieces you want to hinge and you will have a flexible and lightweight connection. The amazing giant hand at right had metal hinges on one side and plastic on the other. He was able to manipulate the fingers by pulling strings attached to a leather glove on the other side. In case you are thinking of doing something similar, he let us know that the thumb was the most difficult part to get to move, so he used his pinky finger instead, ergo the three-fingered hand.

The good Major also told the crowd all about a wonderful malleable plastic called polymorph. It comes in the form of little beads and you can melt them in boiling water on your stove. After they become gel-like and come together in a glob you have about 5 minutes to mold it into any shape you want. And if you don’t like the result you can just put it back into the hot water and start again. Of course, you have to be careful about burning yourself when you take the polymorph out, so if you use something like welders gloves it will protect your hands. It usually comes as a transparent plastic, but you can add dyes or paint it later. Once it is solid it is a great material to drill into or file.

If you want an antiqued look to your paint jobs you can use a dry brushing technique. This is done as the second layer to add a bit of a weathered look to your surfaces. For instance, if you are trying to get the look of copper armor that has begun to oxidize, you should start with a solid layer of copper paint before you add the touch of turquoise to make it look tarnished. To dry-brush, add a glob of paint to your brush (this is a good use for old brushes) and remove most of the paint on a newspaper, magazine, etc. Even if you remove most of the paint there will still be just a bit left on the bristles, and you can apply this to your finished project.

Do you have any suggestions for working with plastic? Please comment below!

For more tips about creatively cutting corners, you can check out parts 1 and 2 of this series.


Tips for Makers: You Can Fake it When You Make it Part 1, “Gathering Resources”

I hope you have been enjoying my Tips for Makers series based on the sessions at the Weekend at the Asylum festival so far. “Taming Metal” parts 1, 2, 3 and 4, were for the people who want to use real metal in their props, costumes and gadgets, but that’s not for everyone. Sometimes you want things to look a certain way but you don’t have the time, materials or skills to make it happen. And there is no shame in cutting corners or substituting one thing for another. I know some people are all about the “authenticity” but Steampunk should be a bit of silly fun and lack of know-how shouldn’t keep you from trying your hand at making something cool.

I went to a session hosted by “Major Quicksilver” during my great weekend in Lincoln and he had tons of advice about materials and how to get them at an affordable rate. The most important thing he told the audience was if you see something, buy it right then and there. Don’t wait for a project to start gathering materials, because chances are when you go back to get something it will be gone, or it will have gone up in price. I have been moving around a lot in the last few years so I have been holding off from gathering too much myself, and I can’t wait until I get settled enough to amass the craft room of my dreams.

"Sky "Shadowbox by ForWhomTheGearTurns

“Sky “Shadowbox by ForWhomTheGearTurns

But even with my space restriction I can’t help myself from going into overstock and scrap store I come to, and I usually leave with at least one treasure. It may take years before I use it, but whenever I start a new project I take infinite pleasure in going through my materials and rediscovering things that will enhance my work. For instance, I started collecting pieces of chandeliers because they were crystaline and shiny. Then I discovered if you turn them upside down they make wicked mini hot air balloons. Some of the scrapbook paper in this piece were from the first pad I ever bought years ago.

There are lots of random things around your house that can be put to new uses. Pill bottles, for instance, can hold tiny things like beads or screws, and the covers can be used as knobs or dials on a jet pack or ray gun. I made a pair of aviator goggles for my toy poodle and I used the caps from pill bottles as the makeshift lenses. He was never going to let me put goggles on him for real, so it didn’t matter if they were functioning. Unfortunately he and the goggles are back stateside or I’d post a photo, so you’ll just have to take my word for it that they are adorable.

Want to add a little brass? The wire used for hanging framed art comes in a brassy color and you can get it for pretty cheap. There are also a lot of old cameras and other gizmos at your local thrift store just waiting for you to take them apart and find all the goodies inside. Drawer pulls which can do double duty as various cosmetic adornments and come in lots of shapes, sizes and finishes and there are often bucketloads of these are scrap yards.

So get on out there and start gathering your resources, you never know when a project will come up!

Here are a few places where I get my arts and crafts supplies. (Sorry UKers, I mostly make and therefore shop in the US).

Ax-Man (4 locations in MN)- hands down the best place to get random mechanical parts that actually function, or just look cool. Glass bottles and beakers, circuit boards, switches, leather scraps, magnets, you name it, they have it and it is SUPER cheap.

ArtScraps (St. Paul, MN)- When I got married I made my own wedding invites by getting cheap art prints and cutting them down to size. They have stamps, fasteners and bulk randomness, plus classes and birthday parties for kids.

The Scrap Box (Ann Arbor Michigan)- This is where I got all those pretty chandelier dangles that I use in my shadowboxes. There is a back room where they charge you by weight so you just go in, load up a grocery bag and it may cost you $5 for a full one.

Scrap Creative Re-Use Center (San Franciso, CA)- This is advertised as a great place for teachers to come and get supplies for their classes. In addition to overstock and bulk goodies, there are magnets, wooden blocks and whiteboards.

Urban Ore– This is a pretty hardcore scrapyard with lots of doors, furniture, marble tiles and other home

Do you have and advice about where to find cool and useful stuff? Please comment below!